Epoxy Resin Recycling Agent STD9100

Product Introduction

STD9100 is a specialized epoxy resin recycling agent. During resin curing, degradable covalent bonds (such as acetal bonds, disulfide bonds, Schiff base bonds, and ester bonds) are introduced into the cross-linked network, enabling the epoxy resin to degrade into small molecular monomers or oligomers under mild conditions. For cured resins, immersion in the KB-9100B solution at room temperature allows the recycling of cross-linked high-performance epoxy resins.

Applications

Wind turbine blades

Nacelle covers and fairings

Wind turbine guide covers

Scenarios requiring epoxy resin recycling

Physical and Chemical Data and Implementation Processes

*The above data reflect typical product properties and should not be interpreted as specifications.
 

Instructions

This product should only be handled by trained professionals.

Operations must be conducted in areas with local or general ventilation to avoid eye and skin contact and inhalation of vapors. Use explosion-proof ventilation systems and equipment.

This product can be cross-linked and cured into a final product when mixed in specific ratios.

It reacts violently with acids and bases. Avoid contact with oxidizers and other incompatible materials.

The proportions of epoxy resin and curing agent in the formulation can be adjusted based on application requirements.
 

Packaging

1kg, 5kg
 

Storage Conditions & Shelf Life

Must be stored in a cool, dry, and clean environment.

Seal immediately after use.

Shelf life in original packaging under proper storage conditions: 24 months.
 

Personal Protection

First Aid

Skin Contact

Rinse thoroughly with soap and water for 5 minutes or until contaminants are removed.

Eye Contact

Lift eyelids and rinse with running water or saline for 20 minutes.

Seek immediate medical attention.

Inhalation

Move to fresh air immediately.

Seek medical help if symptoms persist.